Sonos Digital Music System User Manual download pdf (Page 20)

Chapter 2: System Setup

2-6

Step 2: Place the ZonePlayers in the rooms of your choice

Place the ZonePlayers in the rooms of your choice. If you are setting up a ZonePlayer

100, attach the speakers. If you are setting up a ZonePlayer 80, connect it to an external

amplifier.

If you are connecting a ZonePlayer 100

Your speaker’s power rating should be at least 75W for 8 Ohm speakers, and at least

150W for 4 Ohm speakers. Do not connect speakers rated at less than 4 Ohms.

1. When making connections, ensure that none of the strands of your speaker wire

come in contact with an adjoining terminal on the rear panel.

2. Use your thumb or finger to firmly push the spring-

loaded speaker connector post inward to reveal the

connection hole.

3. Insert the stripped end of the speaker wire into the

hole, then release. The stripped portion should be caught

firmly in the connector post.

4. Repeat to install the other speaker wires.

5. Attach the power cord and plug into a wall outlet.

The Mute button indicator and the ZonePlayer Status indicator will begin to flash.

(If this ZonePlayer was previously connected to another Sonos Digital Music System,

the ZonePlayer Status indicator may light solid white instead.)

If you are connecting a ZonePlayer 80

1. Attach the power cord and plug in the ZonePlayer 80.

Note: Connect the red (+) and black (-) terminals from each speaker to the

corresponding terminals on the ZonePlayer. Mismatching of polarities will result in

weak central sound, and a distorted sense of sound direction.

Note: If you are replacing the wired ZonePlayer in an existing Sonos Digital Music

System with a ZonePlayer 80, first add the new ZonePlayer 80 to your music system.

You can then unplug the wired ZonePlayer, replace it with the ZonePlayer 80, and

move the original ZonePlayer to a new location.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 213 214

No comments

Sonos Digital Music System User Manual Page 20